TIP Mounting Iso Files
http://docs.google.com/Doc?id=dfd84wb_1576vtvghc
From Gentoo Linux Wiki
ISO images are files containing the data of a CD (almost bit per
bit). They can be mounted, using the loopback device. ISO images can
only be mounted read-only (use mkisofs to create images).
[edit] Kernel Requirements
To mount ISO images you need the following in your kernel(as module or builtin):
- loop-back filesystem support (under Device Drivers – Block devices in kernel 2.6)
- ISO 9660 CDROM file system support (under File systems – CD-ROM/DVD Filesystems in kernel 2.6)
You also might want this for mounting non-linux ISO images:
- Microsoft Joliet CDROM extensions (under File systems – CD-ROM/DVD Filesystems in kernel 2.6)
| Linux Kernel Configuration: Joliet CDROM Extensions(2.6) |
File Fystems --> CD-ROM/DVD Filesystems
<*> ISO 9660 CDROM file system support
[*] Microsoft Joliet CDROM extensions
|
[edit] Mounting
To mount the ISO images, you’ll need to have root access. Login as root or use sudo, and execute:
mount -t iso9660 -o loop,user image.iso /wheretomount
Drop ,user if you don’t want users to access the iso files.
Note: If this fails with an error concerning /dev/loop then as root issue the command:
# modprobe loop
Alternatively you may want to add loop to the list of modules that you autoload at boot:
# nano -w /etc/modules.autoload.d/kernel-2.6
and add loop to the bottom of your list of modules.
Hint 1: You can use cdemu to mount BIN images (It’s in portage). You can also use bin2iso to convert them to ISO (also in Portage). You may also use bchunk to convert bin/cue CD-images to ISO.
Hint 2: You can use mdf2iso to convert MDF/MDS files to ISO (It’s in portage).
Or you can mount a .mdf file with:
mount image.mdf /wheretomount -o loop=/dev/loop0
Hint 3: You can use nrg2iso to convert Nero’s .nrg files to ISO (It’s in portage).
Or you can mount a .nrg file with:
mount -o loop,offset=307200 image.nrg /wheretomount
Hint 4: You can use ccd2iso to convert Clone CD’s .img files to ISO (It’s in portage).